Beginning experiment # 4

Proposal ID: "HB3_Inst"

Experiment title: "HB3 instrument alignment/commisioning"

Users: "Mark Lumsden (2l1);Feng Ye (5us);Jaime Fernandez-Baca (jfn)"

Local Contact: ""

Setting sample name to "PG and Si monochromators".

Setting sample type to single crystal.

Setting sample mosaic to 30.000 min.

Setting next scan number to 1

Initializing preset/counting configuration:

Preset counting mode is set to normal.

Setting the default preset channel to "time".

Setting the default preset value to 0.000.

Setting the default counting channel to "detector".

Setting instrument plus-minus configuration to   -   +   -


Initial Spectrometer configuration:

The monochromator is PG002 with a d-spacing of 3.355 Angstroms.

The monochromator is Pg002 with a d-spacing of 3.355 Angstroms.

Collimation:  48-40-40-120

The spectrometer is configured to have a fixed final energy of 14.7000 meV.


The username/password request for web access was cancelled or the dialog box timed out.
Web-based control will not function until these are set.  This can be accomplished using the 'webcontrol' command.

The following error messages were obtained while restoring the experiment status:

Error in the configuration file.  One or more of Peak1, Peak2, ..., Peakn do not contain 9 arguments.

2:31:27 PM  5/16/2007    Executing "preset time 1"


Setting the default preset channel to:  time
and the default preset value to:  1.000000


2:31:28 PM  5/16/2007    Executing "scan s1 @(s1)+-1 @(s1)+1 0.100000"
                         Derived from "preset time 1; scanrel s1 -1 1 .1"


# scan = 1
# date = 5/16/2007
# time = 2:31:28 PM
# proposal = HB3_Inst
# experiment = HB3 instrument alignment/commisioning
# experiment_number = 4
# command = preset time 1; scanrel s1 -1 1 .1
# builtin_command = scan s1 @(s1)+-1 @(s1)+1 0.100000
# users = Mark Lumsden (2l1);Feng Ye (5us);Jaime Fernandez-Baca (jfn)
# local_contact = 
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = PG and Si monochromators
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 5.000000,5.000000,5.000000,90.000000,90.000000,90.000000
# ubmatrix = 0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000
# mode = 0
# plane_normal = 0.000000,0.000000,1.000000
# ubconf = UB16May2007_22958PM.ini
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s1
# def_y = detector
# col_headers = 
#   Pt.         s1       time    monitor   detector focal_length         m1         m2     mfocus         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    16.8826      1.000   4863.000    201.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      2    16.9816      1.000   5023.000    178.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      3    17.0835      1.000   5143.000    204.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      4    17.1808      1.000   4959.000    217.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      5    17.2834      1.000   5191.000    213.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      6    17.3816      1.000   5028.000    185.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      7    17.4824      1.000   5131.000    206.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      8    17.5814      1.000   5202.000    207.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      9    17.6830      1.000   5057.000    192.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
     10    17.7814      1.000   5124.000    193.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
     11    17.8825      1.000   4994.000    197.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
     12    17.9826      0.000      0.000      0.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
# Sum of Counts = 2193
# Center of Mass = 17.381157+/-0.524940
# Full Width Half-Maximum = 0.627003+/-0.314439
# 2:31:43 PM  5/16/2007   scan stopped!!

Abort issued!!
The following error messages were obtained while restoring the experiment status:

Error in the configuration file.  One or more of Peak1, Peak2, ..., Peakn do not contain 9 arguments.

2:32:14 PM  5/16/2007    Executing "preset time 1"


Setting the default preset channel to:  time
and the default preset value to:  1.000000


2:32:14 PM  5/16/2007    Executing "scan s1 @(s1)+-1 @(s1)+1 0.500000"
                         Derived from "preset time 1; scanrel s1 -1 1 .5"


# scan = 2
# date = 5/16/2007
# time = 2:32:14 PM
# proposal = HB3_Inst
# experiment = HB3 instrument alignment/commisioning
# experiment_number = 4
# command = preset time 1; scanrel s1 -1 1 .5
# builtin_command = scan s1 @(s1)+-1 @(s1)+1 0.500000
# users = Mark Lumsden (2l1);Feng Ye (5us);Jaime Fernandez-Baca (jfn)
# local_contact = 
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = PG and Si monochromators
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 5.000000,5.000000,5.000000,90.000000,90.000000,90.000000
# ubmatrix = 0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000
# mode = 0
# plane_normal = 0.000000,0.000000,1.000000
# ubconf = UB16May2007_22958PM.ini
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s1
# def_y = detector
# col_headers = 
#   Pt.         s1       time    monitor   detector focal_length         m1         m2     mfocus         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    16.9838      1.000   5235.000    221.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      2    17.4816      1.000   5043.000    214.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      3    17.9831      1.000   4954.000    203.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      4    18.4837      1.000   5114.000    211.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
      5    18.9825      1.000   4917.000    210.000     0.0000   159.4125   -41.1662     0.0558    35.7644    -0.0003    -0.0002     0.0000     0.0001   159.4167   -41.1647     1.6357     0.0000     0.0000     0.0000    14.7000    14.7011    -0.001
# Sum of Counts = 1059
# Center of Mass = 17.971140+/-0.781291
# Full Width Half-Maximum = 1.424175+/-0.704810
# 2:32:21 PM  5/16/2007   scan completed.

2:32:22 PM  5/16/2007    Executing "drive s1 @(s1)-1"
                         Derived from "preset time 1; scanrel s1 -1 1 .5"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s1              17.98248

Drive completed.


2:32:27 PM  5/16/2007    Executing "begin"

